General Description; Hardware Specifications; Electronic Specifications; Installation Wiring Overview - Assa Abloy Sargent Profile Series Installation Instructions Manual

General Description

2
The SARGENT Profile Series v.S1 Mortise Lock* is available with either an HID
iCLASS technology reader. It utilizes existing infrastructure and IEEE 802.3af PoE (Power over Ethernet)
®
technology as a proven alternative to traditional access control installations.The v.S1 is a self-contained
microprocessor-controlled access control product with non-volatile memory. It uses the existing network
cable to communicate with access control systems. The v.S1 lock holds a total of 2400 unique users per lock.
Using PoE technology coupled with approved third party software, this v.S1 online lock offers a complete,
integrated access control system.
The Profile Series v.S1 Mortise lock may be used for both indoor and exterior applications.
A weather-protective gasket is recommended for exterior applications.
HID and iCLASS are registered trademarks of HID Global Corporation.

Hardware Specifications

3
• Complete lockset with on-board memory
• Available with or without keypad
• ADA compliant
• Latch: One-piece stainless steel, 3⁄4"projection
• Deadbolt: One-piece hardened stainless steel
• Guardbolt: Stainless steel, non-handed
• Case - 12 gauge, heavy duty, wrought steel
• Inside lever retracts latch and deadbolt
• UL Listed (3 hr.)
• Handing (RH/LH/RHR/LHR) can be specified
but is easily field-reversible without
disassembling the lock body
• Locks furnished for 1-3/4" doors. Can be
furnished for other door sizes upon request.
Consult factory.
• Wire from EAC Panel to door must be shielded
with drain terminated at EAC Panel controller

Installation Wiring Overview

5
A. PoE Frame harness assembly
B. PoE data hinge from McKinney
(patent pending)
C. PoE Door harness** from McKinney
D. Profile Series S1 PoE Lock
** Door width determines length
4 1-800-810-WIRE • www.sargentlock.com • A7764D
Profile Series v.S1 PoE Mortise Lock
Supplied by Others
Network
Cable
Network Switch (802.3af)
A
B
125 kHz prox or 13.56 MHz
®

Electronic Specifications

4
• 2400 users per lock; 10,000 event audit trail
• Multiple time zone and holiday access
scheduling
• Centralized lock management
• Real time door status monitoring
• First-In unlock configuration, either by time
or by user (selectable)
• Lock down capable
• Input Power: PoE Class 2 Device, as defined
by IEEE 802.3af
• Supports HID
®
iCLASS credentials (26 - 39 bit); supports
®
CSN reads for other common 13.56 MHz
cards, including MiFare, DesFire, and Felica
*Patent Pending
Surface Mount RJ45
C
D
125 kHz prox or 13.56 MHz