Honeywell Touchpoint Plus Technical Handbook page 139

Parameter Name
maximum fault current from mA output
Signal Fault Max.
sensor
minimum warning current from mA output
Signal Warning Min.
sensor
maximum warning current from mA output
Signal Warning Max.
sensor
Alarm 1 Function Threshold, STEL, TWA
Alarm 2 Function Threshold, STEL, TWA
Alarm 3 Function Threshold, STEL, TWA
Target Zero Range Number
Channel Enable Channel Enable/Disable
Channel Number Channel designate Number
Channel Tag Channel description tag (25 characters)
Detector Name 20 characters
MAN0984_Iss 4_01/19
Pt. No. 3011M5001
Parameter
Description
Configurable Parameter Reference Guide
Applies Read/
Range
to Write
mA Input R/W 0~24
mA Input R/W 0~24
mA Input R/W 0~24
mA Input R/W 0~2
mA Input R/W 0~2
mA Input R/W 0~2
mA Input R/W 0~100000
mV Input R/W Disable/Enable
mV Input R/W 1~16
Alphanumeric
mV Input R/W Character
Range
Alphanumeric
mV Input R/W Character
Range
139
Default Value Remark
1.1 mA
if min/max is set to zero, mA
2.9 mA input board will not detect
warning condition.
3.1 mA
Threshold=0, STEL=1,
Threshold
TWA=2
Threshold=0, STEL=1,
Threshold
TWA=2
Threshold=0, STEL=1,
Threshold
TWA=2
Write available when:
0 Detector Name- User
Detector.
Disable
An unique number
(Auto assigning 1~16 LED )
-
Channel ID will be
automatically assigned
50 chars
Write available when:
40 chars Detector Name- User
Detector
Technical Handbook
Touchpoint Plus