Chapter 3. System General Description - Honeywell Touchpoint Plus Technical Handbook

Chapter 3.
The Touchpoint Plus is an entry level (or upgrade) touch-screen digital Controller for general industrial and
commercial gas detection systems. It has eight input channels, with a further eight channels available through an
optional expansion unit (see Note below).
It can handle a wide range of milliamp, millivolt, and catalytic sensors through analogue inputs, and it can control
various outputs such as audible and visible signals and solenoid valves.
The cabinets are constructed from high-impact plastic and have fully-sealed, easy opening access. They are supplied
with a wall mounting or can be directly mounted to any solid vertical surface or rack. Cable entry is via entry glands on
the lower side.
Touchpoint Plus is rated IP65, which means that it is dustproof and can be subjected to low-pressure water without
significant ingress. This makes it particularly suited to offices, control rooms and unheated boiler rooms.
MAN0984_Iss 4_01/19
Pt. No. 3011M5001
Touchpoint Plus Wall-Mounted Controller
Relays / Actuators
SD Card
mA Loop Sensors
Typical Installation Options
21
System General Description
mA Loop
Audio / Visual Alarm
mV Bridge Sensors
Touchpoint Plus
Technical Handbook