Honeywell Touchpoint Plus Technical Handbook page 15

2.1.2 Safety Hazards (Cont.)
The following general hazards are associated with the use of this equipment:
DO NOT USE WATER if a lithium battery overheats or burns, as it may make the fire worse and it may cause
This equipment contains a number of potentially toxic substances that may pose a health or environmental
hazard if exposed to very high temperatures, VOCs or corrosives, or if improperly handled or disposed of.
Each Touchpoint Plus enclosure is heavy and weighs considerably more when packed. Ensure that a Manual
Handling Risk Assessment is carried out before moving or installing the system, and ensure that enclosures
are fitted securely to a suitable vertical surface. Do not place objects on the enclosures.
Touchpoint Plus uses high energy AC and DC currents that may cause arcing and sparks if shorted out.
Touchpoint Plus can be used to control loud alarms and sirens. Always wear hearing protection when
Touchpoint Plus houses static-sensitive components. Always isolate power and discharge circuits before
Always follow a Safe System of Work when carrying out any work involving Safety Systems.
MAN0984_Iss 4_01/19
Pt. No. 3011M5001
WARNING
Batteries may explode if mistreated. Do not disassemble them or dispose of in fire.
WARNING
Evacuate the area immediately and call Emergency Services.
CAUTION HEALTH AND ENVIRONMENTAL HAZARDS
CAUTION
CAUTION
Always wear eye protection when the enclosure is open.
CAUTION
working in the vicinity of loud or high-pitched noises.
CAUTION
touching internal components. Always take anti-static precautions.
CAUTION
FIRE OR EXPLOSION HAZARD
DO NOT USE WATER
an explosion.
RISK OF INJURY AND DAMAGE
RISK OF EYE INJURY
RISK OF HEARING DAMAGE
RISK OF EQUIPMENT DAMAGE
RISK OF INJURY OR DAMAGE
15
Touchpoint Plus
Technical Handbook