Honeywell Touchpoint Plus Technical Handbook page 152

Event
Code
Type
Info 25 Button Press – Reset alarms and faults
Info 26 Reset peak readings
Info 27 Exported system configuration
Info 28 Imported system configuration
Info 29 Changed system date/time settings via LUI
Info 30 Changed system language
Info 31 Changed network settings
Info 32 Changed web access settings
Info 33 Touch screen calibration successful
Info 34 Touch screen calibration failed
Info 35 Changed LCD backlight settings
Info 36 SD Card was inserted
Info 37 SD card was removed
Info 38 Formatted SD card successfully
Info 39 SD card is not formatted / corrupted
Info 40 SD card is almost full
Info 41 Changed password settings
Info 42 Changed system Label
Info 43 mA Input calibration successful
Info 44 mA Input calibration failed
MAN0984_Iss 4_01/19
Pt. No. 3011M5001
Long Description
152
Display in Event
Triggered
History
Pressed Reset button
Main Board
[button type]
Reset Peak Reading
UI Board CH: xxx (it could be
individual or All)
Exported system
UI Board
Configuration
Imported system
UI Board
Configuration
Changed date/time
UI Board YYYY:MM:DD
hh:mm:ss
Changed language
UI Board
[Language ID]
Changed network
UI Board settings
[Network Type]
UI Board RESERVED
Passed touch
UI Board
calibration
Failed in touch
UI Board
calibration
UI Board Changed LCD settings
UI Board SD Card inserted
UI Board SD Card removed
UI Board SD Card formatted
SD Card not
UI Board
formatted
UI Board SD Card almost full
Changed password
UI Board
[operator]
UI Board Changed system label
mA Input calibration
UI Board passed
Ch: xxx
mA Input calibration
UI Board failed
CH: xx
Event Codes
Details
Button type
0:On Board,
1:Remote, 2: LUI
Language ID
0: English, 1: China,
2:French, 3:German,
4:Netherlands,
5:Spain, 6:Russian,
7:Portugal
Type
0: Ethernet, 1: RS485
Type
0: gracefully, 1:
abruptly
Operator
0: Operator,
1:Maintainer,
2:Administrator
Touchpoint Plus
Technical Handbook