Checking The Capacity Of The Sd Card; Inserting Or Replacing Sd Cards - Honeywell Touchpoint Plus Technical Handbook

Logged Data
Logged data is stored in CSV format and can be read by standard spreadsheet or database software. Note that some
older spreadsheet software may have a row size limitation and may not be able to read the entire event log file.
Directory
:/LOG/GASDATA/MMMYYYY/YYMMDD.csv
:/LOG/GASDATA/MMMYYYY/YYMMDDHHNNSS.csv
:/LOG/EVENT/EVTYYMM.csv
:/LOG/EXPORT/EVTYYMMDDHHMMSS.csv
:/LOG/EXPORT/EVTYYMMDDHHMMSS.csv

7.5.1 Checking the Capacity of the SD Card

There are three ways to check the SD Card size and remaining space:
• Touch Menu>Information>Additional Status.
• Touch the SD Card icon in the menu toolbar (no icon = SD card not fitted, yellow icon = needs checking).
•
Touch the Power Supply icon in the menu toolbar.

7.5.2 Inserting or Replacing SD Cards

Note: Incorrectly removing or replacing an SD card may result in data loss or corruption.
Always turn off and isolate the system before opening the door. Do not switch back on until the door is
reclosed and secured. Do not operate TPPL with the door insecure. Take alternative site safety precautions
To Insert or Replace an SD Card:
1) Log in as Admin or Service.
2) Touch
Menu>Maintenance>SD Card>Eject>
3) Touch
Close>Menu>Maintenance>Power-off>Yes
4) If in a hazardous area, turn off and isolate the system.
5) Open the access door and locate the SD card slot (see Fig. 10 item 2).
6) Insert or replace the card in the SD card slot.
7) Note: the SD card is retained by a spring clip immediately above the card. Press the clip to remove or replace the
card.
MAN0984_Iss 4_01/19
Pt. No. 3011M5001
Directory/filename
Data
Gas logging data
Updated parameters
Event log
Exported event history
Exported configuration
WARNING
while power is off.
(applies only to Class 1 Division 2)
86
Creating
Every day
Every day
Every month
User on demand
User on demand
Touchpoint Plus
Technical Handbook