Chapter 16. Compatible Sensors; Tppl Gas Detectors - Honeywell Touchpoint Plus Technical Handbook

Chapter 16.
The following table lists Honeywell supplied gas sensors that are known to be compatible with Touchpoint Plus.
Midas
Searchpoint Optima Plus
RAEGuard 2 PID
Satellite XT
Searchline Excel LR
Searchline Excel MR
Searchline Excel SR
Sensepoint RFD
Sensepoint Toxic
Sensepoint PPM
Sensepoint HT
Flame Detector
Refer to the respective sensor data sheets for more details.
Note: Touchpoint Plus is not currently approved as a fire or flame detection system, but this chapter will be updated
when its flammables capability is fully tested and certified.
Note: Customer-supplied 3
performance.
Note: * Only Fire Sentry FSxx mA output options are compatible. Relay contact and UV, IR alarms are not compatible.
Note: mV-bridge sensors are not suitable for use in oxygen enriched atmospheres (e.g. >21 %v/v) as the bridge bead
will be too reactive, leading to false readings and premature burn-out. However Oxygen deficient atmospheres (e.g.
<10 %v/v) may suppress sensor output because there will be insuffi
resistance reading.
MAN0984_Iss 4_01/19
Pt. No. 3011M5001
Honeywell Gas Detectors
Sensepoint Flammable
Series 3000
Signalpoint Pro (now obsolescent)
Signalpoint Toxic
Sensepoint XCD CAT
Sensepoint XCD EC
Sensepoint XCD IR
Sensepoint XNX CAT
Sensepoint XNX EC
Sensepoint XNX IR
Fire Sentry FSxx*
Table 17.

TPPL Gas Detectors

Party sensors may be used, but Honeywell is unable to support them or guarantee their
rd
135
Compatible Sensors
Touchpoint Plus
Technical Handbook