Editing A Configured Channel; Editing Ma Input Channel Settings - Honeywell Touchpoint Plus Technical Handbook

6.14.3 Editing a Configured Channel

To edit an already configured channel:
1) Login as an Administrator or Service.
2) Touch
Menu>Configuration>Channel settings
3) Touch the required channel.
4) Touch the screen that you want to edit (refer to previous sections of this manual).
5) Enter the required values in the New Value field and touch [Finish].
6) Review all parameters are valid and touch [Apply].
7) The system will return the new value; touch [Update] to confirm.

6.14.4 Editing mA Input Channel Settings

1) Log in as Service.
2) Touch
Menu>Configuration>Channel Settings
3) Touch the Input Module you want
4)
5) Touch the [Channel] you want to change and then touch [Select].
MAN0984_Iss 4_01/19
Pt. No. 3011M5001
and then select an I/O module.
.
65
Commissioning
Touchpoint Plus
Technical Handbook