Table of Contents
Advertisement
1
Introduction
6 The blue highlight on the right of the window indicates the currently
7 The available softkey labels are displayed in these fields. Additionally,
8 This displays the measurement unit.
9 This displays the number of pages in the current menu. For example,
Figure 1-2 Single numeric and analog display
Figure 1- 2
in the single numeric and analog mode.
10 The information in this field is displayed in two lines and depends on
11 The upper window is configured to show a single numeric display.
12 This field displays the current bridge resistance value as an indicator
13 The lower window is configured to show an analog meter which
12
selected measurement display line. This measurement line refers to the
upper window/upper measurement.
settings associated with the labeled function are displayed under the
label. Softkey labels that are grayed out cannot be selected.
1 of 2 indicates that there are two pages in the menu and the first page
is currently displayed. Pressing the softkey displays the next page,
indicated by 2 of 2 (press the softkey again to display the previous menu
page).
10
11
12
13
shows the default display format of two measurement windows
the sensor calibration factor, sensor calibration and
frequency- dependent offset tables currently selected, and the
measurement frequency.
with or without the thermistor sensor connected.
displays the measurement result and the meter scaling.
14
15
N432A User's Guide
Advertisement
Table of Contents
