Customer And Replication Ip Addresses - IBM System Storage TS7600 ProtecTIER Series Installation Roadmap Manual

Table 20. Customer and Replication IP addresses (continued)
Node A (the
Port
server located in
eth3
the lower part of
the rack) eth4
Node B (the
Port
server located in
eth3
the upper part of
the rack) eth4
Node A (the Port
server located in
eth3
the lower part of
the rack) eth4
Node B (the
Port
server located in
eth3
the upper part of
the rack) eth4
Host names and DNS settings
Table 21. Host names and DNS settings
Item or Setting Instructions
Source host Record the console or host
name name that you want to
assign to the management
console workstation (for
__________
example, dsve1). The
console name and the
domain are used to identify
the TS7650G to the
network.
Domain name Provide the domain name
that you are assigning to
the TSSC (for example,
medina.xyz.it).
Ethernet settings Complete the LAN Adapter Details section when the TSSC connects to your LAN.
Media speed Check Autodetection or
(Ethernet) the media speed of the
Ethernet adapter.
IP Address Network Mask
IP Address Network Mask
Destination or Target Site
IP Address Network Mask
IP Address Network Mask
eth0
IP address (client) #1:
__________
IP address #2 (service):
__________
_ Autodetection
_ 10Mpbs Half Duplex
_ 10Mpbs Full Duplex
_ 100Mpbs Half Duplx
_ 100Mpbs Full Duplx
_ 1000Mpbs Half Duplx
_ 1000Mpbs Full Duplx
Default Gateway Dedicated VLAN
Default Gateway Dedicated VLAN
Default Gateway Dedicated VLAN
Default Gateway Dedicated VLAN
eth1 (if applicable)
IP address #1 (client):
__________
IP address #2 (service):
__________
_ Autodetection
_ 10Mpbs Half Duplex
_ 10Mpbs Full Duplex
_ 100Mpbs Half Duplx
_ 100Mpbs Full Duplx
_ 1000Mpbs Half Duplx
_ 1000Mpbs Full Duplx
Appendix B. IP address worksheet
107