IBM System Storage TS7600 ProtecTIER Series Installation Roadmap Manual page 120

11. If the file systems selected by ProtecTIER for meta data and user data do not
12. When the assignments are correct, click Ok.
13. Review the summary report information and then click Finish.
14. Click Next and then click Finish.
15. Proceed as appropriate:
84
IBM System Storage TS7600 with ProtecTIER: Installation Roadmap Guide
Note: By default, the ProtecTIER system generally selects the smallest
available file systems for use as meta data file systems. The remaining file
systems are available for user data. Storage space for user data cannot exceed
the repository size defined in the Repository Size window.
match the file systems created for those purposes, change the assignment. To
do so:
a. In the Repository resources dialog box, from the Available file systems
list, select File Systems.
b. Use the left and right arrows to move file systems to and from the MD file
systems (meta data) and UD file systems (user data) lists.
The Report window opens.
The Create repository wizard closes and the ProtecTIER system temporarily
goes offline to create the repository.
This process may take several minutes to complete.
v If this is a stand-alone configuration, TS7650G installation and setup is now
complete. Turn the system over to the customer and refer them to the IBM
System Storage ProtecTIER User's Guide for Enterprise Edition and Appliance
Edition, IBM form number GC53–1156, for information on customizing,
using, and maintaining ProtecTIER; and creating, configuring, and
managing replication grids, if applicable.
v If this is a clustered configuration, go to Chapter 12, "Upgrading ProtecTIER
to a cluster," on page 85.