IBM System Storage TS7600 ProtecTIER Series Installation Roadmap Manual page 100

Hide thumbs Also See for System Storage TS7600 ProtecTIER Series:
Table of Contents

Advertisement

64
IBM System Storage TS7600 with ProtecTIER: Installation Roadmap Guide
v Customer Network, IP address [192.168.167.161]:
v Customer Network, Netmask [255.255.255.0]:
v Customer Network, Default Gateway
v Customer Network, Hostname [node1]:
(This is the name provided by the customer to identify this server on their
local network. The hostname should be free of extensions or .com suffixes.
For example: cougar9000.)
v Replication Port 1, IP Address [192.168.170.1]: (eth3)
v Replication Port 1, Netmask [255.255.255.0]:
v Replication Port 1, Hostname [replicationNode1_1]:
(for example: jaguar_source_1) (The replication hostname used by ProtecTIER
Replication Manager.)
v Replication Port 2, IP Address [192.168.171.1]: (eth4)
v Replication Port 2, Netmask [255.255.255.0]:
v Replication Port 2, Hostname [replicationNode1_2]:
(for example: jaguar_source_2) (The replication hostname used by ProtecTIER
Replication Manager.)
The system automatically starts the network configuration process. The
following status messages display:
Configuring network [ Done ]
Configuring Replication Network [ Done ]
Restarting Network Service [ Done ]
Stopping cluster [Done]
Configuring cluster [Done]
Starting cluster [ Done ]
Installing NTP [ Done ]
Starting VTFD Service [ Done ]
Validation will start in 10 seconds
Testing connectivity to the Default Gateway [ Done ]
Getting number of nodes [ Done ]
This is a 1 node cluster, will not test fencing
Validation ended
Install ended successfully
4. If you are not enabling replication, go to step 1 on page 67. Otherwise,
continue to step 5.
5. When you have returned to the command prompt, define the static routes
used for replication. Enter the command:
./ptconfig -staticRoutes <enter>
The message below displays:
Gathering System information [ Done ]
The auto-detected system information displays. For example:
ID
Target
Network Address
1
10.11.194.0
2
10.11.196.0
Followed by the Available Options prompt:
Target Netmask
Local Gateway
Address
255.255.255.0
10.11.195.1
255.255.255.0
10.11.197.1

Advertisement

Table of Contents
loading

This manual is also suitable for:

System storage ts7650g protectier

Table of Contents