Enabling Remote Control; Configuring Rsa Keystrokes; Maximize Video Speed - IBM System Storage TS7600 ProtecTIER Series Installation Roadmap Manual

24. In the Remote Supervisor Adapter II Refresh 1 Welcome window:
a. Use the Inactive session timeout value dropdown list to specify a
reasonable amount of time which will keep your session active until you
can complete your task. (Ten minutes should suffice.)
Do not select the No Timeout setting, as this will prevent anyone else
from logging into the RSA until you have logged out.
b. Click Continue.
See Figure 37 on page 116.
25. Go to "Enabling Remote Control."

Enabling Remote Control

About this task
Procedure
1. In the Remote Supervisor Adapter II Refresh 1 window, click Remote Control
found in the left-hand menu under the IBM logo.
2. In the Remote Control window, click Start Remote Control in Single User
Mode.
The ASM Remote Control window opens.
Note: If the browser on the TSSC or your laptop is configured to block
pop-ups, temporarily disable this function. Accept any Java versions that may
appear on the screen, as well as any Windows security prompts displayed as a
result of trying to open this window.
3. Once remote control is established, go to "Configuring RSA Keystrokes."

Configuring RSA Keystrokes

About this task
Use the following procedure to specify unique keystroke combinations for use
during RAS package configuration.
Procedure
1. In the ASM Remote Control window:
a. Drag the Video Speed (bps) slider to the 5m setting (all the way to the
right) to maximize video speed.
See Figure 38.
Figure 38. Maximize video speed
Note: You may later need to adjust this setting so that the key strokes show
up on the screen when typed.
b. Click the Windows Maximize button to maximize the size of the ASM
Remote Control window.
The command line interface is now established.
2. Return to the procedure that sent you here.
Appendix D. Making a server connection through the Remote Supervisor Adapter (RSA)
117