Step 3: Configure your computer's TCP/IP properties to
communicate with the IBM High Rate Wireless LAN
Gateway
If you are using Microsoft
Edition (SE), or Microsoft Windows Millennium Edition (Me), do the following
to set up Microsoft Networking properties.
1. Click Start → Settings → Control Panel.
Note: If the Network icon is not listed in Windows Me, you might have
to select View all Control Panel Options.
2. Double-click the Network icon.
3. Select the TCP/IP setting for the network adapter you identified in "Step
2: Connect your computer to the IBM High Rate Wireless LAN Gateway"
on page 2-1.
4. Click Properties.
5. Click the IP Address tab.
6. Click to check the Obtain an IP address automatically radio button.
7. Click the DNS Configuration tab.
8. Click to check the Disable DNS radio button.
© Copyright IBM Corp. 2001
®
®
Windows
95, Windows 98, Windows 98 Second
3-1