Console Settings Screen - IBM System Storage TS7600 ProtecTIER Series Installation Roadmap Manual

Figure 18. Console Settings screen
10. In the Internal Network Interface pane, verify that the IP Address: 172.31.1.1
and the Subnet mask: 255.255.0.0, are displayed.
Note: If different values display in the Internal Network Interface pane,
change them to match the IP Address and Subnet mask values provided
above.
11. In the External Network Interface pane, enter the customer-supplied local
area network (LAN) IP address and Subnet mask for the TSSC. See
Appendix B, "IP address worksheet," on page 105.
12. In the System Properties pane, enter the customer-supplied Host Name (the
unique name of the TSSC), Domain Name, DNS1 and DNS2 addresses, and
Default Gateway address.
Note: If necessary, scroll down to access the Default Gateway entry fields and
the Save Changes button, located at the bottom of the screen.
13. Click Save Changes.
When the Save Completed Successfully message displays in the upper-left
corner of the screen, the save is complete.
14. Click the Close this window button in the upper-right corner of the screen.
The Console Configuration Utility menu displays.
15. Click Console Time.
The Console Time and Date screen displays:
Chapter 5. Setting up the TSSC for use with the TS7650G
45