Create Repository Name Window - IBM System Storage TS7600 ProtecTIER Series Installation Roadmap Manual

Click Start → Programs → IBM → ProtecTIER Manager 2.3.2.0 → IBM
ProtecTIER Manager.
The ProtecTIER Manager window opens.
2. In the Nodes pane, select the node on which to create the repository.
3. Select Create repository.
The Create repository wizard starts the data collection process. When data
collection is complete, the Welcome window opens.
4. Read the information on the Welcome window, and then click Next.
The Name window opens. See Figure 28.
Figure 28. Create Repository Name window
5. In the Name window, provide the following information:
a. In the System name field, enter the name of the server on which the
repository is being created.
b. In the Repository name field, enter the name for the repository being
created.
6. Click Next.
The Repository size window opens. See Figure 29 on page 82.
Chapter 11. Using ProtecTIER Manager
81