Table of Contents
Advertisement
C2.19 Change the position of rule-set "Disconnect_WAN" to be the topmost by clicking the arrow-icon
C2.20 Click button "Apply settings" to activate the new firewall-filter
Important:
Before testing the CUT function we have to determine how to re-activate a disconnected WAN port. This has
to be done in the menu Cut & Alarm.
C2.21 Select menu Configuration Cut & Alarm
By default a triggered CUT or Alarm event has to be re-set manually as shown below left. To re-set manually
triggered events change to tab State and click buttons "Reset cut signal" and/or "Reset alarm signal"
Tab "Configuration"
Tab "State"
Alternatively the re-set of events can be configured automatically with a selectable time-delay.
The 2 screenshots below show a configured "automatic mode"
Copyright © 2013 Weidmüller Interface GmbH & Co. KG
93 / 103
All rights reserved. Reproduction without permission is prohibited.
Hide quick links:
Advertisement
Table of Contents
