Weidmuller IE-SR-2GT-LAN Manual page 73

4. Set the basic IP configuration
► Select menu Configuration  IP configuration
Figure A4-2: Default values of menu IP configuration
► Configure the menu entries as following shown
Only for Router 1
Operational mode:
IP address parameters WAN Port:
IP address parameters LAN Port:
Leave „Default gateway" empty if you test
the „simple scenario" with only 1 Router
Default gateway
Only for Router 2
Operational mode:
IP address parameters WAN Port:
IP address parameters LAN Port:
Copyright © 2013 Weidmüller Interface GmbH & Co. KG
All rights reserved. Reproduction without permission is prohibited.
Screenshot of the default IP
configuration of the Routers
IP Router
static
172.16.1.252
255.255.0.0 (Class B)
NAT (masquerading) not set (leave checkbox empty)
static
192.168.20.254
255.255.255.0 (Class C)
NAT (masquerading) not set (leave checkbox empty)
172.16.1.254 (Router of the production network)
IP Router
static
172.16.1.253
255.255.0.0 (Class B)
NAT (masquerading) not set (leave checkbox empty)
static
73 / 103