Weidmuller IE-SR-2GT-LAN Manual page 36

Figure 35: Configuration  VPN  OpenVPN  Tab „Configuration"
The OpenVPN menu allows to create and establish virtual private network connections based on the
OpenVPN implementation. The Router can be configured both as OpenVPN client and OpenVPN server
either based on Layer 2 (Bridging) or on Layer 3 (Routing). A maximum of 10 OpenVPN connections (either
as client or as server) can be configured and started at the same time. Each VPN connection can be
configured individually at Tab's VPN1...VPN10.
Note: OpenVPN connections can only be used with encryption based on certificates.
On each configured OpenVPN server connection theoretically any number of remote OpenVPN clients can
be connected (only limited by the hardware performance of the Router).
Figure 36: Configuration  VPN  OpenVPN  Tab „VPN1"
Screenshot of a configured OpenVPN-Client at tab VPN1
Copyright © 2013 Weidmüller Interface GmbH & Co. KG
All rights reserved. Reproduction without permission is prohibited.
Screenshot of OpenVPN menu tab „Configuration"
with factory defaults (without configured OpenVPN
sessions)
36 / 103