Weidmuller IE-SR-2GT-LAN Manual page 75

For reconnecting Router 3 you also can chose e.g. IP address 172.16.1.100 (subnet mask 255.255.0.0) but you have to
change the cable connection from WAN to LAN port due to the fact that Router 3 is connected to the production network
by LAN port (see network diagram). Otherwise you have to use an IP address of the WAN port range 10.1.0.0.
► Again login into the web interface of the Router using a web browser
Only for Router 1 : Use IP address 172.16.1.252 (http://172.16.1.252) on WAN port
Only for Router 2 : Use IP address 172.16.1.253 (http://172.16.1.253) on WAN port
Only for Router 3 : Use IP address 172.16.1.254 (http://172.16.1.254) on LAN port
User: admin
Password: Detmold
Figure A4-4: Web interface after login with changed IP addresses
► Select menu Configuration  IP configuration to verify that IP parameters are configured correctly
Copyright © 2013 Weidmüller Interface GmbH & Co. KG
All rights reserved. Reproduction without permission is prohibited.
Screenshot of Router 1
showing new IP addresses
75 / 103