Weidmuller IE-SR-2GT-LAN Manual page 77

Configure below described entries on both Routers 1 and 2 in the section LAN: of the "1:1 NAT configuration
menu".
► Activate parameter "Enable 1:1 NAT"  Click on checkbox
► Private IP address/subnet mask: 192.168.1.254/24
Note: No further settings have to be done (Do not activate checkbox "Advanced settings")
► Click button "Apply settings" to activate the new settings.
Figure A4-7: Changed values of menu 1:1 NAT configuration
Note:
The private IP address 192.168.1.254 now is the new IP address of the Router from the perspective of connected de-
vices at the LAN port. All devices connected to the LAN port have to be configured in the private IP range 192.168.1.0
with subnet mask 255.255.255.0.
The 1:1 NAT (address translation) is working in that way that every address of the private Class C network will be
changed to the corresponding public address.
Exemplary result of IP address mapping of configured 1:1 NAT of Router 1:
Machine 1 of network 1 (IP 192.168.1.1) can be accessed by public IP 192.168.20.1 from production network
Machine 2 of network 1 (192.168.1.2) can be accessed by public IP 192.168.20.2 from production network
Machine N of network 1 (192.168.1.n) can be accessed by public IP 192.168.20.n from production network
Exemplary result IP address mapping of configured 1:1 NAT of Router 2:
Machine 1 of network 1 (IP 192.168.1.1) can be accessed by public IP 192.168.21.1 from production network
Machine 2 of network 1 (192.168.1.2) can be accessed by public IP 192.168.21.2 from production network
Machine N of network 1 (192.168.1.n) can be accessed by public IP 192.168.21.n from production network
Copyright © 2013 Weidmüller Interface GmbH & Co. KG
All rights reserved. Reproduction without permission is prohibited.
Screenshot of Router 1
77 / 103