Weidmuller IE-SR-2GT-LAN Manual page 90

Click button "Next"
C2.4
C2.5 Select Inbound Interface = WAN
Click button "Add" to create the first rule of the rule-set "Disconnect_WAN"
C2.6
Enter * in both fields "Source IP address" and "Destination IP address"
C2.7
C2.8 Select IP protocol = ICMP
Click button "Next"
C2.9
C2.10 Leave "ICMP type" as default (any)
C2.11 Click button "Next"
Copyright © 2013 Weidmüller Interface GmbH & Co. KG
All rights reserved. Reproduction without permission is prohibited.
90 / 103