A1-2: Default Values Of Menu Ip Configuration - Weidmuller IE-SR-2GT-LAN Manual

Figure A1-2: Default values of menu IP configuration
► Configure the menu entries as following shown
Operational mode:
IP address parameters WAN Port:
IP address parameters LAN Port:
Default gateway
► Click button "Apply settings" to activate the new settings.
Now the configured parameters will be activated (but not saved). After a few seconds the web interface displays the
new IP addresses as shown in Figure 3. Please keep in mind that you now have lost the Router connection due to
changing the IP address range of your connected LAN port.
Copyright © 2013 Weidmüller Interface GmbH & Co. KG
All rights reserved. Reproduction without permission is prohibited.
Screenshot of the default IP
configuration of the Router
IP Router
static
192.168.20.254
255.255.255.0 (Class C)
NAT (masquerading) not set (leave checkbox empty)
static
192.168.10.254
255.255.255.0 (Class C)
NAT (masquerading) not set (leave checkbox empty)
Can be left blank because there exists no further target network
49 / 103