Weidmuller IE-SR-2GT-LAN Manual page 79

►Click button "Add entry" to add the new static route to the routing table.
Values for the second route:
● Destination network:
● Subnet mask:
● Gateway:
● Metric:
● Interface:
►Click button "Add entry" to add the new static route to the routing table.
►Then click button "Apply settings" to activate the new settings.
Figure A4-9: Changed values of menu IP routing (Tab Configuration) displaying 2 new static routes
8. Monitoring the new activated "routes" at Router 3
► Select menu Configuration  Network  IP routing  Tab "State"
Figure A4-10: Menu IP routing (Tab State) showing the new active routing table
Copyright © 2013 Weidmüller Interface GmbH & Co. KG
All rights reserved. Reproduction without permission is prohibited.
192.168.21.0 (Public address range of machine network 2 at LAN port of
Router 2)
24 (Class C)
172.16.1.253 (Public address of WAN port of Router 2)
Can be left blank (only one route, therefore no need for prioritization)
LAN (Router 2 can be reached by LAN port)
Routing table of Router 3
Configured static routes of Router 3
79 / 103