Table of Contents
Advertisement
Method 2: Software-based disconnection of WAN port by Firewall-rule
Inside of a Firewall-rule it can be configured that the WAN port will be disconnected if this Firewall-rule
matches.
As an example below we create a Firewall-rule which will deactivate the WAN port if a device is sending a
ping request incoming into the WAN port and outgoing to a device connected at the LAN port.
Goto menu Configuration Packet filter
C2.1
Click the "+" icon (Add a new rule-set)
C2.2
C2.3
Mark Define a new rule-set and enter the name and the description of the rule-set as shown below
Copyright © 2013 Weidmüller Interface GmbH & Co. KG
All rights reserved. Reproduction without permission is prohibited.
Output
Input
signal
Disconnect
Alarm event
WAN port
+
-
External 24 VDC
89 / 103
Hide quick links:
Advertisement
Table of Contents
