Figure 28: Configuration Network IP Routing Tab „State"
Display of currently valid routing table.
Factory default configuration without any entry
Figure 29: Configuration Network Forwarding Tab „Configuration"
Configuring standard port forwardings (IP address with port) and pure IP address forwardings. Additonally for
each forwarding the feature SNAT (Source network address translation) can be activated to hide the original
source.
„IP address forwarding" can be configured using an IP address and a wildcard port number (*) instead of a
fixed port number. With this features it is possible to get access to an Ethernet device behind a masqueraded
interface only by IP address. From the behavior this fea-ture is similar to a virtual mapping giving an Ethernet
device a second public IP address.
Figure 30: Configuration Network Forwarding Tab „Configuration" (2 Forwardings configured)
Copyright © 2013 Weidmüller Interface GmbH & Co. KG
33 / 103
All rights reserved. Reproduction without permission is prohibited.