Table of Contents
Advertisement
Figure 8: Diagnostics Remote-Capture
By using the "remote capture" function data packets on both the LAN and the WAN port of the
Router can be recorded for diagnostic purposes. The receiver of the diagnostic data is a PC which
must have installed the tool "Wireshark".
How to use please refer to application note in Appendix C3.
Figure 9: Configuration IP Configuration
This is the basic configuration window of the Router for assignment of IP addresses on the LAN and WAN
port. Each of the two interfaces can be configured with static or dynamic (DHCP) IP addresses. For models
of type IE-SR-3GT-UMTS/3G (as shown above) additionally a section „3G" will be displayed to configure the
3G connection.
Copyright © 2013 Weidmüller Interface GmbH & Co. KG
23 / 103
All rights reserved. Reproduction without permission is prohibited.
Hide quick links:
Advertisement
Table of Contents
