Weidmuller IE-SR-2GT-LAN Manual page 60

How to configure the Router
Starting situation
The Router is set to factory default values and can be accessed either using the LAN port by IP address 192.168.1.110
or using the WAN port by IP address 192.168.2.110.
1. Connect the configuration PC to the Router using the LAN Port (this port will be used in the example).
Note: Use autonegotiation on the Ethernet Interface of the PC
2. Change the IP address of the PC to one of the range 192.168.1.0 / 24
 e.g.
IP address
Subnet mask
Standardgateway
3. Start a Web browser and login into the Web interface of Router (http://192.168.1.110)
User: admin
Password: Detmold
Figure A3-1: Login page of the Router (equivalent with menu Diagnostics  System State)
4. Set the basic IP configuration (Preparing the Router)
► Select menu Configuration  IP configuration
Copyright © 2013 Weidmüller Interface GmbH & Co. KG
All rights reserved. Reproduction without permission is prohibited.
192.168.1.99
255.255.255.0
can be left blank due to direct cable connection
60 / 103