Table of Contents
Advertisement
Quick Links
Ethernet Switch – Premium Line
IE-SW-PL09M-5GC-4GT
Hardware Installation Guide
Third Edition, October 2012
1243420000/02/10.12
Please note:
This document, the detailed manual and any further
product information - if available - can be
downloaded at the internet link:
http://www.weidmueller.com/downloads
Copyright Notice
Copyright
2012 Weidmüller Interface GmbH & Co. KG
All rights reserved.
Reproduction without permission is prohibited.
Advertisement
Table of Contents
Related Manuals for Weidmuller IE-SW-PL09M-5GC-4GT
Summary of Contents for Weidmuller IE-SW-PL09M-5GC-4GT
- Page 1 Ethernet Switch – Premium Line IE-SW-PL09M-5GC-4GT Hardware Installation Guide Third Edition, October 2012 1243420000/02/10.12 Please note: This document, the detailed manual and any further product information - if available - can be downloaded at the internet link: http://www.weidmueller.com/downloads Copyright Notice Copyright 2012 Weidmüller Interface GmbH &...
-
Page 2: Package Checklist
Your Ethernet switch is shipped with the following items. If any of these items is missing or damaged, please contact your Weidmüller customer service for assistance. 1 Ethernet Switch IE-SW-PL09M-5GC-4GT Hardware Installation Guide CD-ROM with User’s Manual and Windows Utility (option) ... - Page 3 Panel Views IE-SW-PL09M-5GC-4GT Front Panel: 1 to 4: 10/100/1000 BaseT(X) port 5 to 9: 10/100/1000 BaseT(X) or 100/1000Base SFP slot combo ports Label PWR1: LED for power input 1 PWR2: LED for power input 2 FAULT: LED indicator MSTR/HEAD LED...
- Page 4 Mounting Dimensions (unit = mm) - 4 -...
-
Page 5: Wiring Requirements
DIN-Rail Mounting The aluminum DIN-Rail attachment plate should already be fixed to the back panel of the IE-SW-PL09M-5GC-4GT when you take it out of the box. If you need to reattach the DIN-Rail attachment plate to the switch, make sure the stiff metal spring is situated towards the top, as shown in the following figures. - Page 6 Wiring the Relay Contact The IE-SW-PL09M-5GC-4GT has two sets of relay outputs—relay 1 and relay 2. Each relay contact uses two contacts of the terminal block on the top panel. Refer to the next section for detailed instructions on how to connect the wires to the terminal block connector, and how to attach the terminal block connector to the terminal block receptor.
- Page 7 Wiring the Digital Inputs The IE-SW-PL09M-5GC-4GT has two sets of digital inputs, DI 1 and DI 2. Each DI consists of two contacts of the 6-pin terminal block connector on the device’s top panel, which are used for the two DC inputs. The top and front views of one of the terminal block connectors are shown here.
- Page 8 RJ45 (10-pin) Console Port Pinouts Description ------ ------ ------ RJ45 (10-pin) to DB9 (F) Cable Wiring Switch 10/100/1000BaseT(X) Ethernet Port Connection The 10/100/1000BaseT(X) ports located on the front panel are used to connect to Ethernet-enabled devices. Most users will choose to configure these ports for Auto MDI/MDI-X mode, in which case the port’s pinouts are adjusted automatically depending on the type of Ethernet cable used (straight-through or cross-over), and the type of device (NIC-type or...
- Page 9 RJ45 (8-pin) to RJ45 (8-pin) Cross-Over Cable Wiring 100 BaseFX or 1000BaseSFP Fiber Port The Gigabit Ethernet ports on the IE-SW-PL09M-5GC-4GT are SFP slots, which require 100BaseFX SFP or Gigabit mini-GBIC fiber transceivers to work properly. Weidmüller provides transceiver models for various distance requirements.
- Page 10 There are 4 Hardware DIP Switches for Turbo Ring on the top panel of IE-SW-PL09M-5GC-4GT that can help setup the Turbo Ring easily within seconds. If you do not want to use a hardware DIP switch to setup the Turbo Ring, you can use a web browser, telnet, or console to disable this function.
- Page 11 IE-SW-PL09M-5GC-4GT DIP Switches The default setting for each DIP Switch is OFF. The following table explains the effect of setting the DIP Switch to the ON position. “Turbo Ring” DIP Switch Settings DIP 1 DIP 2 DIP 3 DIP 4...
-
Page 12: Led Indicators
LED Indicators The front panel of the IE-SW-PL09M-5GC-4GT switch contains several LED indicators. The function of each LED is described in the following table: Color State Description Power is being supplied to power input PWR1 AMBER Power is not being supplied to power input P1. -
Page 13: Specifications
Specifications Technology Standards IEEE802.3, 802.3u, 802.3x, 802.1D, 802.1w, 802.1Q, 802.1p, 802.1X, 802.3ad, 802.3z Protocols IGMPv1/v2, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 66/67/82, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, HTTPS, Telnet, SSH, Syslog, Modbus/TCP, SNMP Inform, LLDP, IEEE 1588 PTP, IPv6 MIB-II, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1,2,3,9... - Page 14 Fast Ethernet SFP-M SFP-S SFP-L Wavelength 1300 nm 1310 nm 1550 nm Max. Tx -18 dBm 0 dBm 0 dBm Min. Tx -8 dBm -5 dBm -5 dBm Rx Sensitivity -34 dBm -34 dBm -34 dBm Link Budget 26 dB 29 dB 29 dB Typical Distance...
-
Page 15: Contact Information
Shock IEC60068-2-27 Free Fall IEC60068-2-32 Vibration IEC60068-2-6 WARRANTY 5 years Weidmüller gives a 5 year warranty on this product in accordance with the warranty terms as described in the general conditions of sale of the Weidmüller company which has sold the products to you. Weidmüller warrants to you that such products the defects of which have already existed at the time when the risk passed will be repaired by Weidmüller free of charge or that Weidmüller will provide a new, functionally equivalent product to replace the defective one.