Weidmuller IE-SR-2GT-LAN Manual page 45

Figure 52: System  Factory defaults  Tab „System"
With this menu item the Router can be set to factory default settings.
Please note that doing a reset to factory values the IP addresses will be changed and the connection
between the Router and the configuration PC can be lost.
Basic factory settings:
IP address LAN port :
IP address WAN port :
User name :
Password :
Figure 53: System  Save  Tab „System" (Screenshot of Router with inserted SIM memory
card)
Save the configuration into flash memory of the device. If a SIM memory card is inserted in the
memory card slot (SCM) at the rear side of the Router then additionally the device configuration
will be stored on the SIM memory card.
Copyright © 2013 Weidmüller Interface GmbH & Co. KG
All rights reserved. Reproduction without permission is prohibited.
192.168.1.110
192.168.2.110
admin
Detmold
This icon (disk symbol) starts flashing if the configuration has been changed
and activated but not saved. Clicking on the icon the web interface jumps
into this menu item (regardless the window which currently is displayed)
45 / 103