Table of Contents
Advertisement
C2- Description how to disable the Ethernet connection at WAN port
The Ethernet WAN port can physically disabled using several methods:
Method 1: Hardware-based disconnection (Cut) by external digital input
Method 2: Software-based disconnection by a Firewall-rule
Method 3: Software-based disconnection by feature "Client monitoring"
Method 1: Hardware-based disconnection of WAN port by external digital input
To disconnect the WAN port provide 2 pins of the 4-pin connector named "CUT Wan port / Signalize Alarm"
with 24 VDC. If you disconnect the power then the WAN port will be activated again. See below described
pin assigment.
Note: Disconnecting the WAN port by digital input overrules the software-based CUT events.
Copyright © 2013 Weidmüller Interface GmbH & Co. KG
All rights reserved. Reproduction without permission is prohibited.
Output
Input key
signal
Start /Stop
VPN active
VPN
+
-
External 24 VDC
88 / 103
Hide quick links:
Advertisement
Table of Contents
