Figure 31: Configuration Network 1:1 NAT Tab „Configuration"
Configuration of the mapping (assignment) of IP address ranges between LAN and WAN port, and vice-
versa.
For more detailed information please refer to Appendix A2.
Figure 32: Configuration Network Network groups Tab „Configuration"
Creating groups with "speaking" names for ranges of IP addresses (Layer 3). A network group always
contains a range of IP addresses with specified subnet (eg 192.168.1.0/24). A network group can contain a
set of single IP addresses and complete IP address ranges. Network groups can be used instead of IP
address ranges if you will create firewall filtering rules (See menu Configuration Packet filters Layer 3).
Copyright © 2013 Weidmüller Interface GmbH & Co. KG
34 / 103
All rights reserved. Reproduction without permission is prohibited.