Mounting On A Stand, Fastening Screws - Festo CPV -VI Series Manual

2. Fitting
1
Socket head
screws: M4 x 45
or M4 x 50
or M6 x 65
2
End plates
3
Fastening bracket
Fig. 2/3: Position of the fastening holes
Festo P.BE−CPV−EN en 0503g
Make sure that there is sufficient space for connecting the
·
supply cables and tubing, and that extra space is avail
able for fitting CPV valve terminals with large surface−
mounted silencers.
With CPV valve terminals with IC connection:
·
insert the four socket head screws supplied into the holes
in the left−hand and right−hand end plates (see diagram).
CPV10
Socket head
M4x45
screws
Tab. 2/9:

Mounting on a stand, fastening screws

1
2
Screw the CPV valve terminal to the connection surface or
·
to the fastening bracket.
CPV14 CPV18
M4x50 M6x65
1
2
3
2−13