Festo CPV -VI Series Manual page 20

1. Sysytem summary
CPV valve terminal variants
IC connection
CP connection
Fig. 1/1: Variants of the CPV valve terminal
CPV valve terminal with
IC connection
CPV valve terminal with
MP connection
CPV valve terminal with
CP connection
1−4
The CPV valve terminals are available with the following
types of electrical connections:
CP direct connection
The CPV valve terminal with IC connection is available with 2
to 8 valve sub−bases (also in odd gradation). The electrical
connection is made individually on each valve solenoid coil.
This CPV valve terminal is available with 4, 6 or 8 valve sub−
bases. The electrical connection of the valve solenoid coils is
made centrally via the multipin connection.
The CPV valve terminal with CP connection is available with
4, 6 or 8 valve sub−bases. The connection to the higher−
order field bus node is made via special ready−to−use CP
cables.
MP connection
AS−Interface
connection
Festo P.BE−CPV−EN en 0503g