Festo CPV -VI Series Manual page 21

1. Sysytem summary
CPV valve terminal with
DI connection
CPV valve terminal with
AS−Interface connection
Festo P.BE−CPV−EN en 0503g
The CPV valve terminals with direct connection are available
for the following field bus systems in the sizes
CPV10/14/18:
CANopen
DeviceNet
Honeywell SDS
Interbus Local bus (only in sizes CPV10/14)
PROFIBUS DP, Festo field bus, ABB CS 31, Klöckner−
Moeller SUCOnet K
These valve terminals can be connected directly to the rel
evant field bus. These CPV valve terminals are fitted with 4 or
8 valve sub−bases depending on the field bus system.
This CPV valve terminal is connected to the AS−Interface bus
via special AS−Interface cables. It is available with 2, 4 or 8
valve sub−bases depending on the variant and with four
different kinds of electrical connections:
with additional supply connection for implementing an
emergency stop function,
with additional supply connection and 4 or 8 inputs (not
CPV18),
without additional supply connection,
without additional supply connection with 4 or 8 inputs
(not CPV18).
1−5