A.1 Technical Specifications - Festo CPV -VI Series Manual

A. Technical appendix
A.1 Technical specifications
General
Permitted temperature range
Storage
Operation
Medium
Protection class as per EN 60 529
Relative humidity
Corrosion protection
(as per FN 940070)
Mounting position
Torques
Connector socket for IC connection
Connector socket for relay outputs
Field bus plug
Fastening screw for wall support or
hat rail
Fastening screws of the CP valve
terminal on the pneumatic multipin
Electrical sub−base
Earth/ground connection
Tie rod
Large surface−mounted silencer
element on the end plate
Valve actuators
Materials
Plates, covers, pneumatic multipin
Seals
Festo P.BE−CPV−EN en 0503g
− 20 to + 40 °C
− 5 to + 50 °C (vacuum generator plates: 0 to + 50)
− 5 to + 50 °C (vacuum generator plates: 0 to + 50)
IP65 (with cable from Festo accessories)
90 %
KBK 2 (vacuum generator plates: KBK 1)
As desired
CPV10/14
0.15 Nm
0.15 Nm
1.15 ± 0.15 Nm
1.5 Nm
2.0 Nm
0.75 ± 0.15 Nm
1.0 Nm
1. Step 0.3 Nm
2. Step 2.0 Nm
CPV10: 1.0 Nm ± 10 %
CPV14: 1.7 Nm ± 10 %
CPV10: 0.8 Nm
CPV14: 1.2 Nm
AL, AL−GD, Ms, PAXMD6, PET, POM, PPS, PA, ST
NBR, HNBR
CPV18
4.0 Nm
1.15 ± 0.15 Nm
4.0 Nm
3.0 Nm
1.0 Nm
1. Step 0.3 Nm
2. Step 4.0 Nm
5.0 Nm ± 1 Nm
A−3