Product−Specific Terms And Abbreviations - Festo CPV -VI Series Manual

Contents and general instructions
Term
End plate
IC connection
(individual connection)
I/O
Manual override
MP connection
(multipin connection)
Pneumatic multipin
Relay plate
Separator plate
Vacuum generator plate
Valve block
Valve sub−base
5/3G valve extension
Tab. 0/4: Product−specific terms and abbreviations
Festo P.BE−CPV−EN en 0503g
Meaning
Cover plate at the left and right−hand ends of the CPV valve terminal with
channels or connections for supplying the valves with compressed air and
for conducting the exhaust air.
CPV valve terminal variant on which every valve solenoid coil can be
connected individually with a special CP cable.
Input/output modules
Manual override
CPV valve terminal variant with sub−D plug via which all valve solenoid
coils are connected centrally.
Plate for central tubing connections on the valve terminal (supply air,
exhaust air and work air connections).
Plate with relay coils for actuating two electrically−isolated outputs.
Plate for dividing the valve terminal into two/four pressure zones.
Plate with vacuum generator (with or without reject pulse)
Basic unit with valve sub−base, vacuum generator plate, separator,
blanking, relay and end plates
Plate with single−solenoid or double−solenoid valves
Module with two unlockable non−return valves. With the CPV10/14 valve
terminals, the valve function 5/3−way in mid−position blocked" is
implemented with this module and the valve sub−base Ident. code C.
XIII