Index Of Terms And Abbreviations - Festo CPV-SC Series Manual

Valve terminal
Hide thumbs Also See for CPV-SC Series:
Table of Contents

Advertisement

Contents and general instructions

Index of terms and abbreviations

Term/abbreviation
Additional pressure supply
plate
Blanking plate
Components
CP
CPV-SC valve terminal
DI connection
(field bus direct connection)
Electrical sub-base
End plate
IC connection
Manual override
MP connection
(multipin connection)
Separator plate
Tubing
Valve plate
Valve manifold
Tab. 0/2:
Product-specific terms and abbreviations
X
The following product-specific terms and abbreviations are
used in this manual:
Meaning
Plate for additional pressurization and exhausting of the valve
terminal
Plate without valve function, for reserving valve locations
Common term for electrical sub-bases, end plates, blanking plates,
separator plates and valve plates
Compact Performance
Compact Performance valve terminal – Smart Cubic (type 80)
Valve terminal variant with field bus direct connection. This CPV-SC
can be connected directly to the appropriate field bus, e.g.
DeviceNet.
Plate with electrical MP or DI connection
Termination plate at the left and right-hand ends of the CPV-SC valve
terminal with channels or connections for supplying the valves with
compressed air and for removing the exhaust air.
Individual connector, individual electric connection. Variant on which
each solenoid coil is connected electrically individually.
Manual override
Valve terminal variant with 15-pin ub-D plug or connection for ribbon
cable. All valve solenoid coils are centrally connected via this
connection.
Plate for dividing the valve terminal into pressure zones
Connecting the supply lines (tubing) to the CPV-SC valve terminal
Plate with single-solenoid or double-solenoid valve
Base unit with valve plates, blanking plates and end plates
Festo P.BE-CPVSC-EN en 1206f

Advertisement

Table of Contents
loading

Table of Contents