Ftp Server Port; Dhcp Server - Vidicode Octo Manual

• Press NEXT to save and move on to the next menu item.

11.5 FTP server port

Ftp server port is the port number through which the Archive software can
log on to the Call Recorder. The Ftp server port is default set to 21, as is the
setting of the port number in the Archive software. If there is no direct reason
to change the Ftp server port it is best left unchanged.
FTP server port:
NEXT
Set the Ftp -server port number
• Press CHANGE to change the Ftp server port number.
FTP-server port:
Enter the Ftp server port number.
Use the numerical keys to enter the Ftp server port number.
• Press STORE to save the Ftp server port number.
• Press NEXT to save and move on to the next menu item.

11.6 DHCP server

In case a DHCP server is used on the network the Use DHCP server option
must be enabled. In case a DHCP server is not used on the network the Use
DHCP server option must be disabled.
Use DHCP server:
NEXT
Enable DHCP server
• Press CHANGE to enable DHCP server.
21
CHANGE STOP
▓
CANCEL
CHANGE STOP
Call Recorder manual © Vidicode 2005
No
59