Ntp Server Port; Gmt Correction - Vidicode Octo Manual

NTP svr: ▓00:000:000:000
STORE
Enter the IP address of the NTP server.
Use the numerical keys to enter the IP address of the NTP server.
• Press STORE to save the IP address of the NTP server.
• Press NEXT to save and to move on to the next menu item.

11.19 NTP Server Port

NTP server port is the port number through which the Call Recorder
connects to the Network Time Server. The NTP server port is default set to
123, as is the setting of the port number in most NTP servers. If there is no
direct reason to change the NTP server port it is best left unchanged.
NTP server port:
NEXT
Set the NTP server port number.
• Press CHANGE to change the NTP server port number.
NTP server port:
STORE
Enter the NTP server port number.
Use the numerical keys to enter the NTP server port number.
Press STORE to save the NTP server port number.
•
• Press NEXT to save and to move on to the next menu item.

11.20 GMT correction

GMT correction property is used to identify the time zone. NTP server
normally issues GMT. GMT correction can be set in half hours from -15:00 to
+ 15:00.
CANCEL
123
CHANGE STOP
▓
CANCEL
Call Recorder manual © Vidicode 2005
67