Vidicode Octo Manual page 34

• Press BACK when the start and stop levels have been set.
The display will show:
Install Line 1
Signal Setting
NEXT
The Signal Setting
• Press NEXT to continue with the Silence Period setting.
The display will show:
Install Line 1
Silence Period
NEXT -
The Silence Period setting.
• Press + or - to alter the Silence Period, after 120 is reached it returns
to 1.
Select a value between 1 and 120 seconds. Keep in mind that when a call is
put on hold the audio level drops and the recording is possibly stopped,
when the call resumes a new recording may start again. In order to keep the
call in one recording a larger Silence Period is suggested. For the recording
of radio communication it is preferred to keep the Silence period small to
prevent consecutive communications in one recording.
34
CHANGE BACK
CHANGE + STOP
Call Recorder manual © Vidicode 2005
10s