Making An Encrypted Recording - Vidicode Octo Manual

The display will show:
New Card Code accepted.
The new card code accepted.
A CryptoCard allows for two invalid PIN code entries. After the third invalid
Pin code entry the CryptoCard is disabled. The next time the Call Recorder
will ask for the PUC code to enable the card again. The CryptoCard allows
for four invalid PUC code entries. After the fifth invalid PUC code entry the
Call Recorder will disable the card indefinitively. It is advised to keep the
PUC code in a safe place.

10.3 Making an encrypted recording

To make an encrypted recording it is essential that the Use CryptoCard
function is enabled in the Recorder settings menu. Enable the Use
CryptoCard function as described in § 4.4. With Use CryptoCard enabled it is
no longer possible to make normal, unencrypted recordings without disabling
the Use CryptoCard function again.
Insert the CryptoCard in the card reader of the Call Recorder. The display
will show:
Monday
card inserted.
CryptoCard inserted.
When a valid CryptoCard has been inserted all recordings made thereafter
will be encrypted as long as the card remains inserted. Removing the card
disables recording automatically.
Encrypted recordings are stored as such and can be played only with a
matching CryptoCard inserted. Encrypted recordings can also be
downloaded to a Pc with the Call Recorder Access System software,
however, they cannot be played on the Pc without a CryptoCard matching
the card used when the recording was made. See the following section for a
detailed explanation.
STOP
22-04-02 11:03
Call Recorder manual © Vidicode 2005
55