Playing An Encrypted Recording - Vidicode Octo Manual

10.4 Playing an encrypted recording

Encrypted recordings can only be played back with the original or a matching
CryptoCard. For playback of an encrypted recording on the Call Recorder
this works quite simply. Search and select the desired recording as
described in Chapter 6. If playback of the encrypted recording is started the
Call Recorder will automatically ask for the Card code.
The display will show:
Card code:
Enter your card code.
After entering your PIN code the soft-key function CONTINUE is added in
the display.
• Press CONTINUE to start playback of the selected recording.
It is not necessary to enter your card code every time.
Recordings can also be downloaded to the Pc with the Call Recorder Access
System application. Encrypted recordings cannot be played on the Pc
without the original or a matching CryptoCard. Your supplier of the Call
Recorder can supply you with a Card reader for your Pc together with the
necessary drivers. The Call Recorder Access System application will show
whether recordings are encrypted or not in the "Use of CryptoCard" column.
When an encrypted recording is played the Call Recorder Access System
application will prompt you for the insertion of a matching card and the
belonging code. After that the recording will play. The Call Recorder Access
System has the ability to remove the encryption. Encrypted recordings can
be exchanged with other Pc's just as any other recording. Encrypted
recordings can be played on any Pc with Call Recorder Access System on it
and with the original or matching CryptoCard.
56
▓
CANCEL
Call Recorder manual © Vidicode 2005