Playing An Encrypted Recording; Using Cryptocards On A Pc - Vidicode SD2750 Manual

downloaded to a PC with the Call Recorder Access System software,
however, they cannot be played on the PC without a CryptoCard
matching the card used when the recording was made. See the
following section for a detailed explanation.
12.5

Playing an encrypted recording

Encrypted recordings can only be played back with the original or a
matching CryptoCard. For playback of an encrypted recording on the
recorder this works quite simply. Search and select the desired recording
as described in Chapter 5.
If playback of the encrypted recording is started the recorder will
automatically ask for the Card code.:
Card Code: »
Enter your card code.
•
After entering your PIN code the soft-key function CONTINUE is added
in the display.
Press CONTINUE CONTINUE to start playback of the selected recording.
CONTINUE CONTINUE
•
It is not necessary to enter your card code every time.
12.6

Using CryptoCards on a PC

Recordings can be played on a PC with the Call Recorder Access System
application on it and with the original or matching CryptoCard.
Encrypted recordings cannot be played on the PC without the original or
a matching CryptoCard. Your supplier of the recorder can supply you
with a Card reader for your PC together with the necessary drivers.
The Call Recorder Access System application will show whether
recordings are encrypted in the "Use of CryptoCard" column. When an
encrypted recording is played the Call Recorder Access System
application will prompt you for the insertion of a matching card and the
belonging code. After that the recording will play. The Call Recorder
Access System has the ability to remove the encryption. Encrypted
recordings can be exchanged with other PC's just as any other recording.
Call Recorder Single Digital manual ©Vidicode 2011-2014
CANCEL
65