Programmable Zero Offset; Zero Offset (Trans, Atrans) - Siemens SINUMERIK 840DE Programming Manual

Frames

6.3 Programmable zero offset

References: /PGA/ Programming Guide Advanced, Section "Subroutines, Macros"
6.3 Programmable zero offset
6.3.1

Zero offset (TRANS, ATRANS)

Function
TRANS/ATRANS can be used to program translations for all path and positioning axes in the
direction of the specified axis. This allows you to work with different zero points, for example
when performing recurring machining processes at different workpiece positions.
6-6
Programming Manual, 10.2004 Edition, 6FC5 298-7AB00-0BP1
Fundamentals