Positional Data - Siemens SINUMERIK 840DE Programming Manual

N10 G90 G0 X45 Y60 Z2 T1 S2000 M3
N20 G1 Z-5 F500
N30 G2 X20 Y35 I0 J-25)
N40 G0 Z2
N50 M30
Example of turning
The dimensions refer to the last point approached.
For entering the circle center point coordinates I and J see circle interpolation G2/G3.
N5 T1 D1 S2000 M3
N10 G0 G90 X11 Z1
N20 G1 Z-15 F0.2
N30 G3 X11 Z-27 I-8 K-6
N40 G1 Z-40
N50 M30
Fundamentals
Programming Manual, 10.2004 Edition, 6FC5 298-7AB00-0BP1
3.2 Absolute/relative dimensions
;Absolute dimensioning, rapid traverse to
;XYZ, tool, spindle on clockwise
;Tool infeed at feedrate
;Circle center point in incremental
dimensions
;Retracting
;End of block
;Tool, spindle on clockwise
;Absolute dimensioning, rapid traverse to
;position XYZ
;Tool infeed at feedrate
;Circle center point in incremental
dimensions
;Retracting
;End of block

Positional Data

3-7