Siemens SINUMERIK 840DE Programming Manual page 6

Preface
Export version
The following functions are not available in the export version:
Function
Five axis machining package
Handling transformation package (five axes)
Multi-axis interpolation (> four axes)
Helical interpolation 2D+6
Synchronized actions, stage 2
Measurements, stage 2
Adaptive control
Continuous dressing
Utilization of compile cycles (OEM)
Sag compensation, multi-dimensional
Hotline and Internet address
If you have any questions, please get in touch with our hotline:
A&D Technical Support
Phone: +49 (0)180 50 50 222
Fax: +49 (0)180 50 50 223
Please send any queries about the documentation (suggestions or corrections) to the
following fax number or email address:
Fax: +49 (0)9131 98 21 76
E-mail: motioncontrol.docu@erlf.siemens.de
Fax form: See the reply form at the end of the document.
Description
Fundamentals
This Programming Guide "Fundamentals" is intended for use by skilled machine operators
with the appropriate expertise in drilling, milling and turning operations. Simple programming
examples are used to explain the commands and statements, which are also defined
according to DIN 66025.
Job planning
The Programming Guide "Advanced" is intended for use by technicians with in-depth,
comprehensive programming knowledge. By virtue of a special programming language, the
SINUMERIK 840D/810D control enables the user to program complex workpiece programs
(e.g., for sculptured surfaces, channel coordination, etc.) and greatly facilitates the
programming of complicated operations.
iv
810DE
−
−
−
−
−
−
−
−
−
−
− function not available
1) limited functionality
Programming Manual, 10.2004 Edition, 6FC5 298-7AB00-0BP1
840DE
−
−
−
−
O1)
O1)
O1)
O1)
−
O1)
Fundamentals