½ D Tool Offset (Cut2D, Cut2Df) - Siemens SINUMERIK 840DE Programming Manual

Hide thumbs Also See for SINUMERIK 840DE:

Table of Contents

Tool radius too wide for inside machining

In such cases, the contours are machined only to the extent possible without damaging the

2 ½ D tool offset (CUT2D, CUT2DF)

With CUT2D or CUT2DF you define how the tool radius compensation is to act or to be

interpreted when machining in inclined planes.

Tool length compensation

The tool length compensation generally always refers to the fixed, non-rotated working

Fundamentals

Programming Manual, 10.2004 Edition, 6FC5 298-7AB00-0BP1

Activate 2 1/2 D radius compensation (default)

Activate 2 1/2 D radius compensation, tool radius

compensation relative to the current frame or to inclined

8.13 2 ½ D tool offset (CUT2D, CUT2DF)

Tool offsets