Siemens SINUMERIK 840DE Programming Manual page 96

Positional Data
3.6 Zero offset (frame), G54 to G57, G505 to G599, G53, G500/SUPA
N10 G0 G90 X10 Y10 F500 T1
N20 G54 S1000 M3
N30 L47
N40 G55 G0 Z200
N50 L47
N60 G56
N70 L47
N80 G53 X200 Y300 M30
Description
Setting the offset values
On the operator panel or universal interface, enter the following values in the internal control
zero offset table:
• Coordinates for the offset
• Angle for rotated clamping and
• Scale factors if necessary
3-22
;Approach
;Call the first zero offset,
;spindle clockwise
;Run program, in this case as a
subprogram
;Call the second zero offset
;Z via obstacle
;Run program as subprogram
;Call third zero offset
;Run program as subprogram
;Suppress zero offset, ;end of program
Programming Manual, 10.2004 Edition, 6FC5 298-7AB00-0BP1
Fundamentals