Activating The Active Tool Offset Immediately - Siemens SINUMERIK 840DE Programming Manual

Tool offsets

8.7 Activating the active tool offset immediately

Programming
The following sequence usually applies:
T = "Ident" or
T = number or
T = duplo number
D = offset
Selection
• With integrated tool management (inside NC)
• Without integrated tool management (outside NC)
Machine manufacturer
Tool management: See machine manufacturer's specifications.
8.7 Activating the active tool offset immediately
Function
MD $MM_ACTIVATE_SEL_USER_DATA can be used to define that the active tool offset
can be activated immediately if the parts program is in "stop" mode. See /FB1/, Description
of Functions, Fundamentals, K2 Axes, "Coordinate Systems..."
Danger
The offset is applied the next time the parts program is started.
8-22
relative D no. structure with internal reference to the associated tools
(e.g., replacement tool management and monitoring function possible)
flat D no. structure without internal reference to associated tools
M06 triggers the tool change
Tool edge number 1 to n (n ≤ 12)
Programming Manual, 10.2004 Edition, 6FC5 298-7AB00-0BP1
Fundamentals